ShadowGrid

Your trays

Saved trays are kept with your account and only you can see them.

Restore backup

Photo

Drag the four dots onto the paper corners

Photo

Sample photo

Choose or take photo

Add to the current tray

Each photo adds its objects as new parts, so one tray can hold tools from several photos.

Paper size

210 × 297 mm

Paper corners

The paper is found automatically. Move the dots if they are not exactly on the corners.

Photo tips

Shoot straight from above, ideally from a little further away with zoom.
Even light gives soft shadows. Avoid flash and a single lamp close by.
Shiny metal: use yellow or beige paper so steel and shadows can be told apart.
Keep the object at least 1 cm from the paper edge.
The whole sheet must be in the photo, on a surface darker than the paper.

Rectified · 1 px = 0.2 mm

100 %

Click an object to switch it on or off

Outline

Detection

Sensitivity50

Shadow filter60

Colour = pocket. Blue hatching = shadow. Raise the filter if the shadow is still coloured.

AI tracing

Use AI outline

Runs a segmentation model (ISNet) in your browser. Nothing is uploaded. The first run downloads 58 MB.

Clean lines

Fit straight lines and arcs0.30 mm

Squares = sharp corners · rings = tangent joints.

Touch up outline

Brush size8 mm

Calibrate scale

Scale 100.0 %

Found objects

Thickness for new parts (mm)

Top view

Click a part to select it · Drag to move it

3D · drag to rotate

Tray

Your tray in 4 steps

Parts

Shift- or Ctrl-click parts to select several, then Merge.

Import DXF / SVG

Gap between pockets (mm)

Size and fit

Clearance (mm)

Extra room around each tool so it drops in easily. 1 mm suits most tools.

Size W × D × H (units)

Stacking lip, so bins can stack (4.4 mm) Magnet holes 6 × 2 mm

Finger holes

Shape

Width (mm)

Suggest automatically

Partner hole

Pairs per part

Pocket top edge

Size (mm) mm

Label

Text

Second line

Font

Style

Height / depth (mm)

Letter spacing (mm)

Rotation

Part names in pocket floors mm

Engraves each part’s name in its own pocket, so you can see what is missing. Name parts in the part panel.

Multi-colour

Pick a colour, then click a face in the top view or the 3D view: a pocket floor, a step, the top surface or the label. Click again to remove it.

Colour layer (mm)

Label

Fit test

Frame height / width (mm)

How did it fit?

Tool library

Add saved parts to any tray without a new photo.

Baseplate

Drawer W × D (mm)

Grid (units)

Name and thickness

Name

Quantity

Thickness

mm

Sticks out

Placement

Rotation0°

Auto-aligned to the longest straight edge.

X / Y / angle

Snap when dragging

Pocket shape

Clearance, this part (mm)

Pocket steps

New step depth (mm)

Actions

Round or bevel corners

Radius (mm) mm

0 of 0 corners selected

ShadowGrid

Printer

Account

Features

Your trays

ShadowGrid

Take the photo